Scale Prevention

Phosphate is not seen as harmful and is safe to ingest at reasonable levels. Aries phosphate cartridges contains food grade, slow-melt polyphosphate crystals that dissolve in water to inhibit accumulation of scale and rust. This […]

See Details

Have a question about this product?

Talk to a ResinTech Specialist.

Note on WQA Gold Seal:

Gold Seal certification may vary by size. Be sure to check the product specifications for the size you require.

Phosphate is not seen as harmful and is safe to ingest at reasonable levels. Aries phosphate cartridges contains food grade, slow-melt polyphosphate crystals that dissolve in water to inhibit accumulation of scale and rust. This filter is used primarily where scale, corrosion and increased amounts of iron are present in the water source. Phosphate cartridges are also available in combination with coconut shell GAC for added taste and odor improvement. Sized to fit standard slimline and big blue housings.

Highlights
  • Fits Standard Residential & Industrial Size Housing

  • Oversized Cartridge for Maximum Media Fill

  • Lot numbered for component traceability

  • Made in the USA

Recommended Uses
  • Residential Drinking Water

  • Commercial

  • Point-of-Entry (POE)

  • RO Pre-Treatment

  • Private Wells

  • Coffee Machines

  • Ice Makers

  • Beverage Dispensing Equipment

Applications
  • Scale & Corrosion Control

  • Iron, Manganese, & Calcium sequestration

  • Rust Inhibitor

Product Specifications

SKU AF-10-3328
Cartridge Type Drop-In
Media Within Slow Melt Phosphate Crystals
Phosphate Fill Weight 1 lbs (0.5 kg)
Dimensions 2.5 x 10 in. (5.5 x 22 cm)
Case Quantity 12
Pressure Drop (𝛥P) <5 psi (<35 kPa)
Awards + Certifications PROP 65 Compliant,
Nominal Rating 25μ
Max. Pressure 125 psi (862 kPa)
Max. Temperature 100 ℉ (37.8 ℃)
Maximum Flow 1 gpm (3.8 lpm)
Capacity (ppm) 56000
Est_Vol @ 2 PPM PO4 18000 gpm (68000 lpm)
End Cap Composition Polypropylene
Gasket Composition Thermoplastic Elastomer
Pad Composition Polyester
Body Composition Polypropylene
Competitive Equivalents
Housing Compatability 158005, 150067, 150150, 150068, 158006

SKU AF-10-3321
Cartridge Type Drop-In
Media Within Slow Melt Phosphate Crystals
Phosphate Fill Weight 1.5 lbs (0.7 kg)
Dimensions 2.5 x 10 in. (5.5 x 22 cm)
Case Quantity 12
Pressure Drop (𝛥P) <5 psi (<35 kPa)
Awards + Certifications PROP 65 Compliant,
Nominal Rating 25μ
Max. Pressure 125 psi (862 kPa)
Max. Temperature 100 ℉ (37.8 ℃)
Maximum Flow 1 gpm (3.8 lpm)
Capacity (ppm) 84000
Est_Vol @ 2 PPM PO4 27000 gpm (102000 lpm)
End Cap Composition Polypropylene
Gasket Composition Thermoplastic Elastomer
Pad Composition Polyester
Body Composition Polypropylene
Competitive Equivalents PCC-1, 155100
Housing Compatability 158005, 150067, 150150, 150068, 158006

SKU AF-20-3322
Cartridge Type Drop-In
Media Within Slow Melt Phosphate Crystals
Phosphate Fill Weight 2 lbs (0.9 kg)
Dimensions 2.5 x 20 in. (5.5 x 44 cm)
Case Quantity 9
Pressure Drop (𝛥P) <10 psi (<70 kPa)
Awards + Certifications PROP 65 Compliant,
Nominal Rating 25μ
Max. Pressure 125 psi (862 kPa)
Max. Temperature 100 ℉ (37.8 ℃)
Maximum Flow 2 gpm (7.6 lpm)
Capacity (ppm) 112000
Est_Vol @ 2 PPM PO4 36000 gpm (136500 lpm)
End Cap Composition Acrylonitrile Butadiene Styrene
Gasket Composition Thermoplastic Elastomer
Pad Composition Polyester
Body Composition Acrylonitrile Butadiene Styrene
Competitive Equivalents
Housing Compatability 158007, 158205, 158204, 150069, 150156

SKU AF-10-3326-BB
Cartridge Type Drop-In
Media Within Slow Melt Phosphate Crystals
Phosphate Fill Weight 3 lbs (1.4 kg)
Dimensions 4.5 x 10 in. (9.9 x 22 cm)
Case Quantity 8
Pressure Drop (𝛥P) <5 psi (<35 kPa)
Awards + Certifications PROP 65 Compliant,
Nominal Rating 25μ
Max. Pressure 125 psi (862 kPa)
Max. Temperature 100 ℉ (37.8 ℃)
Maximum Flow 3 gpm (11.4 lpm)
Capacity (ppm) 168000
Est_Vol @ 2 PPM PO4 54000 gpm (204500 lpm)
End Cap Composition Acrylonitrile Butadiene Styrene
Gasket Composition Thermoplastic Elastomer
Pad Composition Polyester
Body Composition Acrylonitrile Butadiene Styrene
Competitive Equivalents
Housing Compatability 150237, 150469, 150239

SKU AF-20-3327-BB
Cartridge Type Drop-In
Media Within Slow Melt Phosphate Crystals
Phosphate Fill Weight 5 lbs (2.3 kg)
Dimensions 4.5 x 20 in. (9.9 x 44 cm)
Case Quantity 4
Pressure Drop (𝛥P) <10 psi (<70 kPa)
Awards + Certifications PROP 65 Compliant,
Nominal Rating 25μ
Max. Pressure 125 psi (862 kPa)
Max. Temperature 100 ℉ (37.8 ℃)
Maximum Flow 5 gpm (18.9 lpm)
Capacity (ppm) 280000
Est_Vol @ 2 PPM PO4 90000 gpm (340500 lpm)
End Cap Composition Acrylonitrile Butadiene Styrene
Gasket Composition Thermoplastic Elastomer
Pad Composition Polyester
Body Composition Acrylonitrile Butadiene Styrene
Competitive Equivalents
Housing Compatability 150233, 150235, 150467, 160166

Related Product

Get expert advice

Need a little help deciding what to do next?
Reach out to us using the link below.