Fluoride Reduction

Most water supplies contain some naturally occurring fluoride. Fluoride can occur in drinking water naturally as a result of the geological composition of soils and bedrock. Fluoride also enters drinking water in discharge from fertilizer […]

See Details
Buy Now

Have a question about this product?

Talk to a ResinTech Specialist.

Note on WQA Gold Seal:

Gold Seal certification may vary by size. Be sure to check the product specifications for the size you require.

Most water supplies contain some naturally occurring fluoride. Fluoride can occur in drinking water naturally as a result of the geological composition of soils and bedrock. Fluoride also enters drinking water in discharge from fertilizer or aluminum factories. The EPA has set the level of protection for fluoride at 4.0 mg/L or 4.0 ppm, to prevent potential health risk. Aries fluoride reduction cartridges utilize the advanced media technology of ResinTech® SIR-900 media, a synthetic aluminum oxide that remove Fluoride by a chemical reaction with the media. ResinTech® SIR-900 has minimal shrinkage /swelling and low-pressure loss, and can be used over a wide pH range. These high capacity cartridges are available with Quick Connect connectors in 6″ and 12″ lengths. Aries Inline filters cartridges are designed for low-flow, point-of-use filtration.

Highlights
  • High Capacity Fluoride Removal

  • Resintech® SIR-900

  • Fits Standard Residential & Industrial Size Housing

  • Oversized Cartridge for Maximum Media Fill

  • Quality Produced & Made in the USA

  • WQA Gold Seal Certified

Recommended Uses
  • Residential Drinking Water

  • Commercial

  • Laboratory

  • Point-of-Entry (POU)

Applications
  • Fluoride Reduction

Product Specifications

SKU IFB-06-3690-QC
Cartridge Type Inline
Connection Type
Media Within SIR-900
Awards + Certifications PROP 65 Compliant, WQA Gold Seal Certified
Max. Pressure 125 gpm (862 kPa)
Dimensions 2 x 6 in. (4.4 x 13.2 cm)
Case Quantity 12
Nominal Rating 25μ
Max. Temperature 100 ℉ (37.8 ℃)
Service Flow 0.1 gpm (0.4 lpm)
Capacity 150 gal (550 L)
End Cap Composition Acrylonitrile Butadiene Styrene
Pad Composition Polyester
Body Composition Acrylonitrile Butadiene Styrene
SKU IFB-12-3690-QC
Cartridge Type Inline
Connection Type QUICK CONNECT
Media Within SIR-900
Awards + Certifications PROP 65 Compliant, WQA Gold Seal Certified
Max. Pressure 125 gpm (862 kPa)
Dimensions 2 x 12 in. (4.4 x 26.4 cm)
Case Quantity 12
Nominal Rating 25μ
Max. Temperature 100 ℉ (37.8 ℃)
Service Flow 0.2 gpm (0.8 lpm)
Capacity 300 gal (1150 L)
End Cap Composition Acrylonitrile Butadiene Styrene
Pad Composition Polyester
Body Composition Acrylonitrile Butadiene Styrene
SKU IFB-06-3690-FT
Cartridge Type Inline
Connection Type QUICK CONNECT
Media Within SIR-900
Awards + Certifications PROP 65 Compliant, WQA Gold Seal Certified
Max. Pressure 125 gpm (862 kPa)
Dimensions 2 x 6 in. (4.4 x 13.2 cm)
Case Quantity
Nominal Rating 25μ
Max. Temperature 100 ℉ (37.8 ℃)
Service Flow
Capacity
End Cap Composition Acrylonitrile Butadiene Styrene
Pad Composition Polyester
Body Composition Acrylonitrile Butadiene Styrene
SKU IFB-12-3690-FT
Cartridge Type Inline
Connection Type 1/4" FNPT
Media Within SIR-900
Awards + Certifications PROP 65 Compliant, WQA Gold Seal Certified
Max. Pressure 125 gpm (862 kPa)
Dimensions 2 x 12 in. (4.4 x 26.4 cm)
Case Quantity
Nominal Rating 25μ
Max. Temperature 100 ℉ (37.8 ℃)
Service Flow
Capacity
End Cap Composition Acrylonitrile Butadiene Styrene
Pad Composition Polyester
Body Composition Acrylonitrile Butadiene Styrene

Related Product

Get expert advise

Need a little help deciding what to do next?
Reach out to us using the link below.